Waterproofing seems simple-until your pack leaks on Day 3 of a rain-soaked hunt. The difference between "water-resistant" and truly waterproof hunting gear often comes down to one choice: TPU lamination vs PU coating.
Here's the technical truth:
PU (Polyurethane) Coating:
Applied as a liquid layer on fabric backside.
Cheap, but degrades under UV exposure, becoming brittle and cracking.
Breathability is poor-traps sweat inside.
Typical hydrostatic head: 1,000–3,000mm (fails in heavy rain).
TPU (Thermoplastic Polyurethane) Lamination:
A microporous film bonded between fabric layers via heat/pressure.
Resists UV, cold, and flex fatigue-no cracking after years of use.
Allows moisture vapor to escape (breathable).
Hydrostatic head: 5,000–10,000mm+ (withstands submersion).
At GAF Outdoor, we use 3-layer TPU-laminated shells as standard in all expedition packs. We even test them in our lab with a "bucket submersion test": 10 minutes underwater, zero leakage.
One Canadian outfitter switched to our TPU packs after losing $ 8,000 in soaked optics during a coastal bear hunt.
Because in the wild, waterproof isn't marketing-it's survival.
→ Build gear that survives real weather. See our waterproof tech specs.







